ROKURO Pro -Scrupted Prim Previewer and Editor -
ROKURO Pro - Scrupted Prim Previewer and Editor -
by Yuzuru Jewell(KANAE PROJECT) produced by youwith 06/12/10
ROKURO Pro 2.0.51 for win32 download Virus checked by NOD32 ver.6299
The trial period is for three days. During the trial period, you cannot export Sculpted Prim files.
Coil plug-in 110716 [option] download Virus checked by NOD32 ver.6299
Gear plug-in 110716 [option] download Virus checked by NOD32 ver.6299
Cam plug-in 110716 [option] download Virus checked by NOD32 ver.6299
I apologize for the plug-ins not having been enclosed by ROKURO Pro 2.0.51.
If you can't find plug-ins in the downloaded zip file, please download it once again.
ROKURO Pro displays both the Sculpted Prim and its surface texture.
A sculpted Prim can be edited in the three modes: ROKURO/TOKOROTEN/MAGE. The three modes can be combined and used. Furthermore, ROKURO Pro can correct or adjust a coordinate for every control point in the BITMAP mode.
For more information on the different modes, see below.
Caution: It is not guaranteed that a display in Rokuro Pro will be exactly the same as the appearance of the Sculpted Prim in Second Life.
ROKURO Pro was previously called AGARI. AGARI means tea to finish off the meal, and finishing.
ROKURO Pro 2.0.46-50 users can use their password.
ROKURO Pro 1.33-1.40 users need to purchase an updated serial box.
The Software is provided "AS IS," without a warranty of any kind.
In no case shall the author be liable for any damage or unwanted behavior of any computer hardware and/or software.
No Rental. Customer may not rent or lease the SOFTWARE to someone else.
All title and copyrights in and to the SOFTWARE (including but not limited to all images, photographs, animations, video, audio, music, text, and other information incorporated into the SOFTWARE), the accompanying printed materials, and any copies of the SOFTWARE, are owned by KANAE PROJECT. The SOFTWARE is protected by copyright laws and international treaty provisions. Accordingly, Customer is required to treat the SOFTWARE like any other copyrighted material, except as otherwise allowed pursuant to this LICENSE and that it may make one copy of the SOFTWARE solely for backup or archive purposes.
Operating environment
Windows XP/Vista/7 - The environment where "Second Life" for Windows operates.
There is no installer.
You can uninstall only by deleting the file called ROKURO_PRO.exe.
How to use Preview
You can drag an object and can make it rotate.
You can change the scale of the object using the mouse wheel.
The Tabs in ROKURO Pro:

ROKURO is a Japanese turning lathe, a potter's wheel. ROKURO mode makes a solid lathe-type object.

TOKOROTEN is Japanese extruded jelly. TOKOROTEN mode makes a pushed-out object.

The control points can be adjusted in 1 pixel increments by changing the numeric value in the text box, then clicking on the boxes with the arrow on them.

MAGE means bending in Japanese.
MAGE mode makes shapes similar to bent pipes such as neon tubes.
*Shapes using a combination of TOKOROTEN and ROKURO can be made.
However, these may not be entirely satisfactory.
How to use the Menus:
Texture Menu (On the far left of the menu bar)
It returns to default texture.
The image which will eventually cover your shape will be loaded. The software resizes the file size to 512x512. The file types that can be used are JPEG/PNG/BMP/PSD.
You can choose the aspect ratio of a sculpted prim from the following.
32x32(Default), 64x16, 128x8, 256x4, 16x64, 8x128, 4x256.

Sculpted Prim Texture is loaded from a bitmap or previously exported text. The form of the image which is available is .tga .jpg .bmp .png .obj .txt.
* The size of Sculpted Prim must be either of 64x64, 128x128, 256x256, or 512x512.
* There is no compatibility in an ROKURO and TOKOROTEN export file. Only ROKURO 33Point file is compatible.
* If you choose "Blender TGA File", it can read correctly the VU map that was output by Blender.
A sculpted prim bitmap (.tga), .obj file, and ROKURO/TOKOROTEN/MAGE export file is specified and outputted.
*An output sculpted prim bitmap's size is 64x64/128x128/256x256/512x512. .obj file can use Wings3D.
You can set up Rotation Degree and Twist Degree.
You can set up the TGA size of the file to save. I recommend 64x64.
Copy Protection by transparency - When a Prim is made or modified, you can make it transparent to prevent the texture from being copied by screen capture.
The program is ended.
When you choose more than one control point, the following function is available from a right-click popup menu. When you don't select any control points, the popup menu is not enabled.
There is a 256-step UNDO and REDO function.
-Select All
All the control points currently displayed are chosen. You may shift + click to choose points individually, or draw a box around the points you wish to select.
A chosen control point turns counterclockwise around those centers of gravity.
A control point turns clockwise around the center of gravity of the chosen control point.
-Horizontal Align
Chosen control points are lined up on the horizontal axis.
-Vertical Align
Chosen control points are lined up on the vertical axis.
-Equal Intervals
The interval of three or more selected control points is evenly arranged.
An object is twisted. While displaying the TOKOROTEN tab, only the control point of the side is twisted.
-Optimize(TOKOROTEN Mode only)
The location of the control point which is inside is optimized.
-Same width
While displaying the MAGE tab, thickness of an object is made the same.(MAGE Tab only)
-Flip The upper and lower sides of Prim are replaced.
-An object is transformed into a multiple-sided pillar etc.
-Start From Vertex The angle which creates a polygon is changed.
You can expand the editing screen. You can also change the magnification by using the wheel of the mouse.
You can overlay a grid. The control points will snap to the grid.
-Display Background/Load Background
You can place an image in the background of the editing screen.
The files types of the image which can be used are JPEG/PNG/BMP/PSD.
Level of detail
-The level of detail is displayed in three distances: Near, Middle and Far.
You can use the plug-ins which are in the same folder as this program.
When you use it for the first time, you have to register it.
-Polyhedron plug-in (Polyhedron.plg)
You can choose ten or more kinds of polyhedrons.
*The aspect ratio of the map file specifies 32x32 automatically.

-Stairs plug-in (Stairs.plg)
You can make the stairs of four types.
You can specify the number of steps for the stairs from 3 to 14.
You can specify the height of a sleeve (sides of stairs), if stairs with a sleeve are chosen.
*The aspect ratio of a map file specifies 32x32 automatically.

-Coil plug-in (Coil.plg) [option] download
total coils : You can specify the number of turns of the coil.
32x32 : You can specify the aspect rate of the sculpted prim.
clockwize coil / anticlockwize coil : You can specify the direction which rolls the coil.
shape : You can specify the form of the section of the coil.
Rotated : You can rotate the form of the section of the coil.
Crystallized: You can arrange a control point only on a vertex in the section of the coil.
Width : You can specify the thickness of the both edges of a coil.
Z Position : You can specify the height of the both edges of a coil.
Diameter : You can specify the diameter of the both edges of a coil.
Keyboard Operation
If you push an arrow key, the selected control point is moved 1 pixel. If you press the arrow keys and the Shift key simultaneously, it will move 8 pixels.
If you are displaying the grid, control points are moved per grid. A Shift key cannot be used.
Tutorial Video
You can see Tutorial Video from
06/12/10 2.0.51
-The library of OpenGL was updated. It avoids the bug of ATI Catalyst 10.5.
01/17/09 2.0.50
-The library using OpenGL was updated.
The fault which cannot be booted with an ATI video card was fixed.
01/15/09 2.0.48
-The treatment when entering an old password was changed.
-The library using OpenGL was updated.
12/18/08 2.0.47
-The fault which cannot read an OBJ file was corrected.
12/01/08 2.0.46
-The function to specify the aspect ratio of a map file with a File-New menu was added.
-The plug-in function was added.
Polygon plug-in and stairs plug-in were added.
-The function to read VU map file which Blender outputted was added.
-Start From Vertex was added to the Shape menu.
-The display algorithm of the edit pane was updated.
-The status bar was updated.
05/30/08 1.40
-The fault of the color of the ordinate in TOKOROTEN mode was corrected.
-The description of an output of an OBJ file was changed.
-The Load of OBJ file is corresponded to a new OBJ file. You can also load the OBJ file outputted before.
-The preview pane became more exact.
-Cushion was added to the Shape menu.
04/14/08 1.39
-The load sculpted prim option of BMP and JPEG and PNG is added.
-Function of copy protection by transparent was added.
-The output algorithm of sculpted prim is changed.
-The fault of Horizontal Align of a Mage tab is corrected.
-The fault of Vertical Align of a Mage tab is corrected.
-The fault of a display of Symmetry of the View menu is corrected.
12/01/07 1.38
-"View Level" Menu is changed to "Level of Detail".
-"Initializing" Menu of File is changed to "New".
-"Initializing" Menu of Texture is changed to "Reset".
-"Flip" function is added.
-"Select All" function is added.
-The frequency in use of CPU was decreased.
-The problem of the output of the OBJ file which occurred in the decimal point in the area using "," was corrected.
10/13/07 1.37
-The save option of TGA is added.
-The fault of the Read of less than 512x512 TGA file is corrected.
-The fault of a cordinate display of Bitmap is corrected.
09/29/07 1.36
-The fault in which a general protection fault occurs with an ATi video card at the time of a termination is corrected.
09/25/07 1.35
-The fault of the rendering was corrected.
-Setup Dialog was added. Rotate Degree and Twist Degree can be changed.
09/19/07 1.34
-The fault of the import of a ROKURO/TOKOROTEN text file was corrected.
-The zoom of the preview was smoothed.
-The upper limit and lower limit of the zoom were set up.
-The save was changed into the specification which is not made unless View Level is Near.
09/14/07 1.33
First release
Trial & Buy
A trial period is for three days. In the trial period, you cannot output Sculpted Prims.
When starting the software, a dialog box which asks for a serial code is displayed.
After the trial period has passed, it becomes impossible to start.
Please purchase Rokuro Pro Serial Box in
Rokuro Pro Serial Box gives you your license code.
GLScene is released to the public as open-source under Mozilla Public Licence.
Graphics32 is released to the public as open-source under Mozilla Public Licence.
-ImageEn by HiComponents 1998-2010
Thanks to KJ Georgette for help with this Readme file.
Mesh Image
Mesh image file download
KANAE PROJECT All rights reserved.
KANAE PROJECT / Secondlife